Công Suất DAPRO D2450 New
Thông số kỹ thuật
Model | D2450 |
System Type | 2 kênh Class TD |
Stereo mode | 2 x N/A @ 2Ohm 2 x 630W @ 4Ohm 2 x 550W @ 8Ohm |
Bridge mode | 1 x 1400W @ 4Ohm 1 x 1100W @ 8Ohm |
THD+N | ≤0.6% |
Damping Factor | >500 |
Crosstalk | >72dB |
Voltage Gain | 37.7dB |
Slew Rate | >20V/μs |
Frequency | 20Hz – 20KHz / ±0.5dB |
Signal Ratio | >96dB |
Idle Power Consumption | <49W |
Max. Power Consumption |
< 1000W |
Input Sensitivity | 0.775V/1V/1.4V |
LED Indicators | Signal, Clip, Protect, Power, Bridge |
Input Impedance | 20k Ohm Balanced, 10k Ohm Unbalanced |
Front Control | Power switch, Gain control |
Rear Control | Sensitivity Switch, Mode Switch |
Output Connectors | 2 NL4 Sockets, 2xBinding Posts |
Cooling | Low Noise Continuously Variable speed fan |
Protection | Full short circuit, Open circuit, thermal, Ultrasonic, RF Protection. Stable Into reactive or Mismatched loads |
Load Protection | On/Off muting, DC fault power Supply shutdown |
Operating Voltage | 230V (+/- 10%), 50-60Hz USA Version 110V (+/- 10%), 50-60Hz |
Fuse | T-20A |
Dimensions | 483*89*372mm |
Net weight | 17Kg |